Working principle

Vibrating fluidized bed dryer is to apply mechanical vibration to the ordinary fluidized bed. Under the action of vibration force and wind, the material is thrown forward continuously in the horizontal direction and presents a fluidization state. The hot air passes upward through the fluidized bed and the wet material for heat exchange, so that the material and the hot air are in full contact to complete the heat transfer process. The wet air is dedusted by the cyclone separator and discharged by the induced draft fan. The dry material is discharged by the discharge port.

Performance characteristics

1. Adding vibration motor can reduce the small gas velocity, significantly reduce the amount of heated air and air, reduce dust entrain, and reduce the investment in auxiliary equipment.

2, the material can be fully contact with the air, dry evenly, high heat transfer coefficient, energy saving effect is significant.

3, material without intense back mixing, small damage to material particles, avoid destroying crystalline materials.

4, material drying and cooling can be completed in the same dryer, simplify operation procedures, reduce equipment investment.

5, the dryer is adjustable, can choose different residence time according to the characteristics of the material.

6. The uniformity and regularity of the material particle size are not strict, and the operation is flexible.

Adaptive material

The vibrating fluidized bed dryer produced by our company is widely used for drying loose granular materials, such as chemical raw materials in plastic resin, powder, granular material drying dehumidification, etc.